Code: WE79
This watch is sold in our Watches for restoration section and does not come with a warranty. If you are looking for watch with a full warranty, please go to our Stock page or ask for assistance to find what you are looking for.
This is an English fusee detent chronometer which has been loosely recased in a case which has hallmarks for London 1858. The dial is also not original
The movement has a broken chain and the movement is not running. Please see the professional condition report on this movement at the end of this description
Movement – the gilt ¾ plate lever movement is fusee driven with a detent escapement and has a free-sprung balance with a helical hairspring. It is signed “Brillman & Co, 76 Leadenhall Street, London, 568” and is in 95% mint condition
Case – the movement comes in a RECASED English silver open face case and is LOOSE with no pin – it is just sitting in the case. It has a hinged back and bezel and is wound and set from the back and the movement is accessed from the front also. The case is decorated with coin edged sides and engine turning on the back with a vacant cartouche. The inner cover has a plugged winding hole and new winding and setting holes.
The case is in 85% mint condition – some soft bruises and marks
Dial – the later silver dial has NO Hands. It is decorated with gold flowers and numbers and is in 95% mint condition
The watch has a mineral glass
The watch measures 50mm wide x 20mm deep. The movement measures 44mm x 8.8mm
The watch is key wound / key set and comes with a key
Chronometer movement condition report
½ plate movement with electrogilded plates
Single helical steel hairspring
Chain detached and broken end, mainspring is also broken.
Detent is a softened steel replacement, which is split and repaired however the gold tone passing spring is present.
Locking stone is replaced with a steel guard pin.
Impulse jewel on the balance appears to be complete though with signs of alteration.
Balance pivots appear short in my eyes.
The photograph below shows the movement with the balance assembly removed. It is immediately obvious that the detent is not in functioning condition.
.